top of page
{
PRIMER COAT - BUILDCOAT - TOP COAT R
1
MULTI-PURPOSE EPOXY
YB1 MULTI-PURPOSE PROFESSIONAL GRADE EPOXY IS A 100% HIGH SOLIDS COATING DESIGNED TO BE USED AS A PRIMER, BUILD COAT OR TOP COAT. THIS RESILIENT SURFACE IS INDUSTRIAL GRADE AND FORK LIFT RATED.
MIX RATIO
2:1
CAN BE APPLIED PIGMENTED OR CLEAR
1 PINT OF COLOR PER 3 GALLON MIX
STANDARD PACKAGING
3,15, 150 GALLON KITS
CUSTOM FILLS & PAIL COLOR
OPTIONS AVAILABLE
DESIGNED FOR SILICA SAND, VINYL FLAKE OR QUARTZ BROADCAST
OUTSTANDING QUALITY TO PRICE RATIO
RESIN (PART A)
MIXED VISCOCITY 77deg (f) = 122-1300cps
FLASH POINT > 300deg (f)
WEIGHT PER GALLON: 9.8 lbs
VOC: CLEAR 42 G/L
MIXED VISCOCITY 70deg (f) = 590cps
WORKING TIME (min)
50deg (f) = 30-40 min
70deg (f) = 20-25 min
90deg (f) = 15-20 min
FLASH POINT > 255deg (f)
WEIGHT PER GALLON: 9.8 lbs
VOC: PIGMENTED 48 G/L
HARDENER (PART B)
DRY TO TOUCH (hrs)
50deg (f) = 12-14 hrs
70deg (f) = 7-8 hrs
90deg (f) = 5-6 hrs
MAXIMUM RECOAT (hrs)
50deg (f) = 36hrs
70deg (f) = 30hrs
90deg (f) = 24hrs
FLOOR INSTALLATION TEMPERATURE LIMITS: 50-90 DEGREES(f)
RESIN (PART A) +
HARDENER (PART B)
CLEAR PIGMENTED
16 HOURS 5600psi 4900psi
24 HOURS 7000psi 6103psi
72 HOURS 9633psi 8510psi
7 DAYS 11849psi 10849psi
ABRASION
RESISTANCE 57 mgs. 60 mgs. (CS17 WHEELS 1000(g), 1000 CYCLES)
TYPICAL COVERAGE RATE: 160FT2 PER GALLON @ 10 MILS
WATER ABSORPTION: ASTM C-413: <0.1%
FLAMMABILITY ASTM D-635 SELF EXTINGUSIHING
ADHESION TO CONCRETE > 400psi
The data shown above reflects typical results based on laboratory testing under controlled conditions. Variations from the data are possible in ambient conditions.
COMPRESSIVE STRENGTH: ASTM C579-A
bottom of page