top of page
YB_blank.png

{

YB.png

4

SLAB CUTTER CONCENTRATE

YB4 SLAB CUTTER was chemically engineered to make wet-grinding and power-trowel polishing jobs faster and more efficient. YB4 is a non-acidic low pH (2.4) formula that softens the cap allowing rapid stock removal while significantly extending diamond tool life. YB4 is also formulated with densifier making wet-grind applications up to 40% faster.   

​

MIX RATIO 
3:1 

NON ACIDIC LOW pH SILICA FORMULA 

AUTO-SCRUBBER OR PUMP SPRAYER APPLICATION

STANDARD PACKAGING 

5, 55 & 275 GALLONS  

CUSTOM FILLS  & PAIL COLOR
OPTIONS AVAILABLE

DOWNPACK & DILUTE ONSITE AND INCREASE PROFITS 50-80% 

COVERAGE 

MIXING AND APPLICATION 

CONCRETE POLISHING MATERIAL

AUTO SCRUBBER APPLICATION METHOD: YB4 SLAB CUTTER is a proprietary formula designed to be applied to high & medium density concrete as well as high porosity and hard concrete.

Application rate: 375 square feet per gallon with auto scrubber set at full flow. - 15 Gallon tank fill will cut 5,675 square feet of concrete slab - 30 gallon tank fill will cut 11,350 square feet of concrete slab

PUMP SPRAYER APPLICATION METHOD:  375 - 400 square feet per gallon.

SPEEDS UP INITIAL CUT TIME ON HARD/DENSE CONCRETE  

Dilution: Mix Ratio for both auto scrubber and pump sprayer application: 3:1

1. Open package concentrate
2. Mix 3 parts clean potable water to 1 part YB4 CUTTER 
3. Mix can either be within the auto scrubber or pump sprayer 15 gallon auto scrubber tank - 3.75 Gallons. YB4 CUTTER 30 gallon auto scrubber tank - 7.5 Gallons YB4 CUTTER Pump Sprayer ratios depend on pump sprayer size Note: To facilitate mixing and agitation, place YB4 CUTTER into the mixing vessel first and then fill with clean potable water.

EQUIPMENT:  Apply YB4 CUTTER using a mechanical auto scrubber or pump sprayer. For pump sprayer application, use either a fan tip or cone tip to ensure even spraying

PHYSICAL STATE Liquid APPEARANCE Opaque White ODOR None SPECIFIC GRAVITY 1.15 - 1.19 @ 77 °F / 25 °C
DENSITY 9.6 – 11.0 lb/gal
SOLUBILITY IN WATER Complete pH (100 %) 2.4 - 2.6
VISCOSITY 15 cps @ 77 °F / 25 °C
FREEZING POINT 32 °F / 0 °C
VOC CONTENT 0.00 % EPA Method 24

Note: These physical properties are typical values for this product and are subject to change

PHYSICAL PROPERTIES 

INCLUDES FREEZE GUARD TECHNOLOGY
bottom of page