top of page
YB_blank.png

{

FORMULATED TO MAXIMIZE METALLICS

YB.png

1

DECORATIVE EPOXY 

YB1 DECORATIVE EPOXY IS A UV STABLE 100% HIGH SOLIDS COATING SPECIALLY FORMULATED TO BRING OUT THE BEST IN METALLIC PIGMENTS. THIS DECORATIVE SURFACE IS INDUSTRIAL GRADE AND FORK LIFT RATED. 
 

MIX RATIO 
3:1 

DESIGNED FOR METALLIC FLOORS

1 PINT OF COLOR PER 3 GALLON MIX 

STANDARD PACKAGING 

3,12, 20, 220 GALLON KITS  

CUSTOM FILLS  & PAIL COLOR
OPTIONS AVAILABLE

SPECAL UV STABLE FORMULA MAKES YB DECORATIVE EPOXY A VERSATILE CHOICE! 

A PROVEN BEST SELLER WITH A   LOYAL DESIGNER FOLLOWING

CURED PHYSICAL PROPERTIES 





Compressive Strength ASTM C579 11,200 psi (77,221 kPa)
Tensile Strength ASTM C2370 7,300 psi (50,331 kPa)
Flexural Strength ASTM D790 7,770 psi (53,572 kPa)
Indentation MIL-D-3134F No Indentation
Hardness, Shore D ASTM D2240 80
Percent Elongation ASTM D2370 6.0%
Water Absorption ASTM C413 0.2%
Bond Strength, ACI Committee #503 pg. 1139-1141 ASTM D454
>400 psi (>2,757 kPa)
Abrasion Resistance Taber Abrader CS 17 Wheel, 1000 gm load, 1000 cycles
ASTM D4060 85 mg
Water Resistance, Fed. Test Std. #141 Method 6011 ASTM D1308 No Effect
Salt Water Resistance Fed. Test Std. #141 Method 6061 ASTM B117 No Effect
Boiling Water Resistance (1 hour continuous exposure) ASTM D2571 No Effect

 

APPLICATION AND COVERAGE

Blended Ratio: 3:1 by volume
Blended Solids: 100%
Pot Life (15 lb. mass)* 24 minutes
Curing Time, 70º F @ 50% RH
Set to Touch: 8 hours
Minimum Recoat: 12 - 14 hours
Maximum Recoat: 48 hours
Foot Traffic: 12 hours
Floor & Air Temperature Limitations** 55ºF - 90ºF (13°C - 32°C)
Blended Viscosity, ASTM D2196 1000 cps
Recommended Clean-Up Solvent: Xylene
VOC, ASTM D39600

Coverage:  160 SF/gallon (3.9 m2/liter) to achieve 10 mils DFT or at 100 SF/gallon (2.24 m2/liter) to achieve 16 mils (9.5 mm) DFT

bottom of page